http://led.linear1.org/led.wizI know a lot of ppl ask about what resistors to use. Well I came across this link on hidplanet forums. All you need is the forward voltage (V), current (ma), and the number of LED's your want to install, and it will tell you how to wire em up, what resistor you need, and if there will be any problems. All that info is available from any website you buy from or from radioshacks website. Just click to view the specs. :)
Just thought I'd share.
Oh and for voltage source, enter 13.4. Yeah, I know, if you hook a multimeter up and turn the bike on it should read 14.4, but if you average out over running vs not running, and all the other electrical crap drawing energy, its a good idea to use 13.4 and be safe. Just my advice...
__________________
1993 CBR F2 - F3 motor - Factory racing covers - F3 carbs stage 1 Jet Kit - Vortex Rearsets - 520 Chain/Sprockets -1/+3 - 1000rr front end - Ohlins Steering Damper- Custom subframe - Modified and filled 600RR Swingarm and rear end - 2001 f4i gauges - OEM HID projector - Under engine dual exhaust
2003 CBR954RR Black and Red